How To Make A Tv Antenna With A Coat Hanger

Can you use a coat hanger for a TV antenna?

If your TV antenna broke, or cable is too expensive, do not worry! You can use common household items like a metal coat hanger to make your own antenna. Hangers can be used to make simple, less-effective antennas, or even powerful, complex antennas that will give you a much better chance at getting some free channels.

Making your own TV antenna is a great way to save money while getting good reception with your television. All you need is a coat hanger and some simple tools to make your own antenna. Here’s a step-by-step guide on how to make a TV antenna with a coat hanger.

Steps

• Step 1: Get a wire coat hanger and straighten it out. If you don’t want to put in the effort to straighten out a curved hanger, you can buy a straightened one from a hardware store.
• Step 2: Bend the upper part of the coat hanger in the shape of a “J”. To do this, make two 90 degree horizontal bends. Make the first bend about 3.2 cm (1.25 inch) from the top and make the second bend 2.5 cm (1 inch) after the first bend.
• Step 3: Take the ends of the “J” shape and bend them up and out at a 30 degree angle. Make sure the angle is the same on both sides. This will form the arms of the antenna.
• Step 4: Place your antenna on the wall and plug it into your TV. Tune your TV to the appropriate frequency and enjoy your rabbit ears!

Tips

• Make sure to use a coat hanger that is made of a stiff material. This will ensure that your antenna has the best signal possible
• If the antenna does not work properly at first, you can try adjusting the angle of the arms for better reception.

Now that you know how to make a TV antenna with a coat hanger, start watching your favorite shows without any worries!